Madd Decals
Tacoma Upper Grille 3 Racing Stripe Decals
Couldn't load pickup availability
You will receive 3 separate stripes, allowing you to position each of them how you wish.
Sizing:
Each stripe is 8" long, the smallest one is 1" wide, middle one is 1.175" wide, and last one is 1.35" wide to provide a neat look of each stripe getting progressively thicker. Please note, sizing may differ slightly from mockup photos.
You will just need to cut each stripe once applied with a sharp knife - this allows these stripes to fit in many different locations and vehicles and can be customized to fit.
Application Instructions:
1. Clean and dry the reflectors. The overlays will stick best to clean smooth surfaces.
2. Remove the overlay and position gently on the top edge of the reflector.
3. Carefully position the overlay and ensure it covers the entire reflector and does not cover the bumper itself.
4. If you find the overlay is not centered correctly, simply peel it off and try again. The vinyl is quite durable and can be repositioned.
5. Once you feel the overlay is in the correct position, smooth it out from top to bottom to ensure air bubbles don't get trapped underneath.
6. Check for air bubbles. In most cases air bubbles can be worked to the edge of the overlay, but if not, a pin hole will allow the air out and become virtually invisible.
